Have you heard of the Invisible Adhesive Disc Plate Hanger? I have also seen them called Disc Plate Hangers, Invisible Plate Hanger, etc... They are a made to stick on the back of plate for hanging on the wall. Plate groupings on walls are very popular lately, I've been seeing them everywhere! Here is what the Invisible plate hanger or adhesive disc hanger looks like:
 |
| Invisible Adhesive Disc Plate Hanger |
What is so great about these hangers is they hang the plate without showing hardware like the metal old school plate hangers. The only thing I didn't like about them was the price so that's why I came up with my own version of adhesive disk hangers with some things I had around the house.
Invisible Plate Hanger Tutorial
What You Need -
E6000 glue, a sturdy piece of fabric cut in a triangle, wire, sandpaper or a tool that sands and rubbing alcohol
I first made the metal loop by taking a piece of wire and looping it twice around a pen and then twisted the ends together.
I then determined on the back of the plate where I wanted the loop and right below that I sanded a rough area... with the stone plates, I used a grinding bit on a Dremel.
I then wiped the roughened area with some rubbing alcohol.
Then I put about a nickel sized glob of E6000 on the sanded area and stuck the metal loop ends into the glue while laying the loop on the plate in the position I wanted it.
Then I stuck the fabric triangle, right below the loop covering the glue and the bottom half of the wire. I then gently pressed the triangle down and tried to smooth the glue out evenly under it.
I sat it aside and let it dry for 24 hours.... and it worked like a charm!
For a more detailed tutorial with photos showing an alternate way to make these using jute go to:
Thank you so much for dropping by! I hope that you have enjoyed this tutorial and will find it useful :)
For ideas and inspiration about hanging plates on your walls go to: Decorating with Plates:Using Dinner Plates to Decorate your Walls
0 comments:
Post a Comment